When it comes to woodworking engraving machines, many woodworking engraving manufacturers do not follow the operating principles and specifications when using this type of machine. Therefore, when the machine is used, the machine often fails, or the life of the machine becomes short and easily damaged. So, what is the correct way to operate this machine?
1. Return to zero before use. When using the engraving machine, the woodworking engraving machine manufacturer reminds the operator that this is very important. Because if you don't return to zero, then all computer typesetting will deviate and invalidate.
2. Note that the maximum time for continuous use should not exceed ten hours. Ten hours is the upper limit. Exceeding this time, the engraving machine is generally difficult to load, so pay attention to this.
3. Adjust the speed of the knife. When using the engraving machine, adjust the rotation speed of the carving knife according to the hardness of the engraving wood. If the material is too hard, do not use high speed for a long time.
4. After use, ask for cleaning. Many people will forget this point, but it is very important. After using the machine, clean it, especially the wood chips should be carefully cleaned, do not get stuck in the gap of the engraving machine, otherwise it will cause the machine to malfunction during the next use period. Or it can't be rotated, or the accuracy of the rotation is affected.
