Today, we will talk about the reason why the engraving machine lettering is not smooth. This topic, if you want to know the friends, then let me follow the small series now.
The effect engraved by the engraving machine does not have to be 100% consistent with the customer's requirements, especially if the engraved effect is not smooth, it is necessary to find out the cause and deal with it in real time. However, when we are in the real task, if this situation emerges, the important reason is the cause of these two aspects: laser engraving machine manufacturers
First, the engraving machine y-axis or x-axis emerges from the gap, and there are also gaps in the two axes at the same time, which leads to the swaying in the process of carving, so that the engraving of the door is inclined to cause the lettering to be slippery;
Second, the linear speed of the engraving machine and the curve speed are too different. The engraving machine is so shocking when the curve is taken, so that the engraving door is emerging and the lettering is not slippery. How to deal with it?
The first cause is that if the engraving machine is a round rail, it is necessary to change the guide rail or the slider. The measure will be larger than the original one. If it is a square rail, it is a lot simpler, as long as the height is adjusted or the front and rear sliders can be used;
If it is the second cause, then the speed of the straight line or curve should be changed. The value of the change is affirmed by the parameters of the carving machine itself.
