Stone engraving machine requirements for the working environment

At present, there are few stone engraving machines dedicated to stone carving on the market, most of which are hand-carved, with low work efficiency, unstable quality and high labor intensity. In order to let our customers better apply our products, the following is for everyone. 1. Introduce the working environment requirements of stone engraving machine.

1. Avoid equipment such as strong electric and strong magnets that seriously affect the signal transmission of stone engraving machines, such as electric welding machines and launch towers.

2. Use three-core power supply to ensure good grounding of stone engraving machine and reduce interference.

3, the voltage requirements are stable, to avoid large fluctuations, it is recommended to use a voltage regulator.

4. The machine should not work for a long time in the environment of strong acid and stone engraving machine.

A good working environment is the premise to ensure the normal operation of the stone engraving machine. It is hoped that the majority of users can provide a stable working environment for the stone engraving machine, thus ensuring the working efficiency and work quality of the stone engraving machine, and bringing the expected economic benefits.

Stone engraving machine to adjust the knife speed to pay attention to what

    When buying a stone engraving machine, the engraving machine manufacturer will tell the purchaser that it is necessary to adjust the rotation speed of the engraving knife when using it. Different engraving needs require different speed requirements. So, what kind of problems should you pay attention to when adjusting the speed of the knife? Today, Xiaobian will introduce you to relevant content.
    First of all, the stone engraving machine manufacturer allows the user to adjust the rotation speed before use to avoid the damage of the knife, and also to make the engraving effect better. Different stone materials have different hardnesses, and in the stone carving with relatively large hardness, if the rotation speed of the knife is too large, the problem of breaking the knife is easy to occur. But if the speed is too small, the effect and speed of the engraving will not be very good. Therefore, you need to adjust the speed before you can use it better.
    When adjusting the rotational speed of the engraving machine of the stone engraving machine, it is necessary to combine the hardness of the stone. You can adjust it a little earlier, then move the knife closer to the stone and slowly increase it. When the speed is tested, it is found that the carving knife of the engraving machine is easy to float, and the rotation speed is relatively large. If you engrave this kind of situation, it is easy to break the knife, and the effect of carving is not good, not beautiful enough. Therefore, it is generally better to reduce the rotation speed by appropriately reducing the point.