When buying a stone engraving machine, the engraving machine manufacturer will tell the purchaser that it is necessary to adjust the rotation speed of the engraving knife when using it. Different engraving needs require different speed requirements. So, what kind of problems should you pay attention to when adjusting the speed of the knife? Today, Xiaobian will introduce you to relevant content.
First of all, the stone engraving machine manufacturer allows the user to adjust the rotation speed before use to avoid the damage of the knife, and also to make the engraving effect better. Different stone materials have different hardnesses, and in the stone carving with relatively large hardness, if the rotation speed of the knife is too large, the problem of breaking the knife is easy to occur. But if the speed is too small, the effect and speed of the engraving will not be very good. Therefore, you need to adjust the speed before you can use it better.
When adjusting the rotational speed of the engraving machine of the stone engraving machine, it is necessary to combine the hardness of the stone. You can adjust it a little earlier, then move the knife closer to the stone and slowly increase it. When the speed is tested, it is found that the carving knife of the engraving machine is easy to float, and the rotation speed is relatively large. If you engrave this kind of situation, it is easy to break the knife, and the effect of carving is not good, not beautiful enough. Therefore, it is generally better to reduce the rotation speed by appropriately reducing the point.
