What is the origin of the advertising engraving machine y axis back to the origin?

The origin of the ad engraving machine y axis returning to the origin is the origin of the workpiece, which is the origin of the workpiece coordinate, which is the origin determined for the workpiece size programming, and is generally the starting point of the workpiece machining.

The advertising engraving machine y axis can not return to the origin?

First: the engraving machine is energized, the power supply, the driver and the inverter have display lights.

Second: Is the data line loose?

Third: If the control card is used for a long time, there will be dust near the metal corner. It is best to turn off the computer and take it down for hygiene.

Fourth: If it is still not possible, reinstall the software. It may be that the system files in the software are corrupted. Software damage is more likely to be possessed.

Fifth: If you can't, look for a technician.
How does the y-axis of the advertising engraving machine return to the original point?

When we select the "Return workpiece origin..." option, the tool tip will automatically return to the workpiece origin from the current position.

The importance of path optimization when the y-axis of the advertising engraving machine is normally returned to the original position?

In order to return to the origin of the workpiece, the tool tip can safely pass through the passing space without accidents due to obstacles such as workpieces and fixtures. Therefore, the zero return path should be optimized.

Is the path optimization of the y-axis of the advertising engraving machine normal when returning to the original position?

1. If the Z-direction coordinate of the end point is larger than the Z-direction coordinate of the starting point, the Z-axis is first fed to the Z-axis end position separately, and then the X and Y axes are linked to reach the destination point.

2. If the coordinate of the end Z direction is smaller than the coordinate of the starting Z direction, the X and Y axes are first linked to the X and Y coordinates of the destination point, and then the z axis is separately fed to the coordinates of the end point of the z axis.

Because the Z coordinate of the end point is often on the machined surface of the workpiece, in order to avoid hitting the workpiece surface or the tool tip after the tool tip returns to the workpiece zero point, in fact, the Z axis is not back to zero, but an offset value above the zero point. This value is set by the "Retraction point" in the machining parameters of the "System Parameter Window".

How to maintain the y axis of the advertising engraving machine?

It is required to clean the X, Y and Z axis guide surfaces after each operation, to clean all the chips and dirt on the track, and secondly to check whether the surface of the guide rail is scratched or not. Add lubricant to the rails for easy work the next day.